Soldering a Cabochon Setting to a D-Shape Shank
Three tips from @theschoolofjewellery.ie: flatten with a mitre block, center with tweezers, and place solder in front while heating from behind.
More →Curated from @metalsmithsociety on Instagram and searchable by keyword or hashtag.
Three tips from @theschoolofjewellery.ie: flatten with a mitre block, center with tweezers, and place solder in front while heating from behind.
More →
A sand casting tutorial from @roadkillgems on a core casting system for rings with undercuts, plus tips for a clean sand impression.
More →
A tip from @shayne.suttie.jewellery on using a steel enameling trivet as a heat sink to ball the ends of several wires to the same size.
More →
A tip from @mijouxjewellery on straightening and work hardening kinked silver wire by rolling it with a planishing hammer on a steel block.
More →
A tip from @master.engraver on sliding an allen wrench through a GRS BenchMate collet holder to hold rings steady for engraving or setting.
More →
A recap of my first @stullerbenchjeweler Bench Jeweler Workshop, with stone setting and engraving demos and a facility tour.
More →
A tip from @sarahweberpurves on trimming the bezel to height and tamping corners first, plus how tall to make a bezel.
More →
A tip from @areteadorned on grinding a blackhead removal tool paper thin to pry a bezel open and remove a stone without damage.
More →
Why melting clean gold scrap into a 10mm sheet ingot mold from Pepetools is economical, and how its design makes pouring easy.
More →
A tip from @theschoolofjewellery.ie on screwing two emery discs together on a mandrel to taper brooch and lapel pin wire evenly.
More →
A tip from @fronterajewelry on texturing annealed metal in a rolling mill with tissue paper, sandpaper or leaves, and cleaning the rollers after.
More →
A tip from @theresaapplegatejewelry on reshaping or gently stretching a single chain link over a tapered tool to fit a jump ring.
More →