Pulse Arc Welder Tacking a Bezel Before Soldering
Learn to tack a bezel inside with a pulse arc welder after positioning it with super glue, so it cannot shift when you solder.
More →Curated from @metalsmithsociety on Instagram and searchable by keyword or hashtag.
Learn to tack a bezel inside with a pulse arc welder after positioning it with super glue, so it cannot shift when you solder.
More →
Learn to polish chain safely by hand, looped over a nail hammered into the bench, instead of on rotary tools that can grab it.
More →
A tip from @zil.jewelry for storing wire spools in hanging file folders tagged by metal, gauge and shape, in sheet protectors.
More →
A tip from @jblissstudios for roll printing textures, sandwiching annealed silver between work hardened brass to protect the rollers.
More →
Learn how annealing gold differs from sterling silver, heating gold to an even cherry red, from my podcast episode on working in gold.
More →
A tip from @lucywalkerjewellery for cleaning up excess solder with a sharp knife edge rubber wheel kept shaped with a diamond plate.
More →
A maintenance tip from @down_to_the_wire_designs on when and how to replace worn carbon brushes in a Foredom flex shaft.
More →
Learn to set a heart bezel by checking the height, setting the inner cusp and point first, then working the sides toward the corners.
More →
A technique from @sarah.jackson.jewellery for submerging a ring's gemstone in a water filled wooden dapping block while soldering the band.
More →
Learn how I set thick bezels with a Foredom hammer handpiece and modified anvil tip, holding work in Thermoloc and cleaning with pumice.
More →
Learn to hold a ring in Thermoloc and set the bezel with a brass rocker to avoid marring, plus a Patreon tool giveaway.
More →
A tip from @young_crone for cutting tube by spinning it in a flex shaft in reverse against the saw blade, marking lengths with dividers.
More →